PVC drain length is usually 4 meters or 6 meters, if yo […]
PVC drain length is usually 4 meters or 6 meters, if you need other lengths, manufacturers can negotiate and order. The nominal diameter of pvc drainage pipes have strict rules, in accordance with national standards GB / T5836.1-2006 implementation. pvc drain pipe nominal diameter specifications for 32mm, 40mm, 50mm, 75mm, 90mm, 110mm, 125mm, 160mm, 180mm, 200mm, 250mm, 315mm, 400mm, 500mm, 630mm and so on.
PVC drain specifications to meet the outside, its performance indicators must also be complied with. The appearance of the drain pipe requires that the inner and outer walls should be smooth and smooth without any bubbles, cracks, dents and marks, etc. The tensile yield strength should be more than 40MPa; the softening temperature should be above 80 degrees Celsius; the result of falling weight impact test should be less than 10 %.
PVC drainage pipe wall thickness of the more stringent requirements, the outer diameter of the wall thickness of the specific requirements to comply with GB / T5836.1-2006 standards, the longitudinal retraction rate of less than 5%, the same cross-section of the deviation can not exceed 14%.
PVC water supply pipe: De20, De25, De32, De40, De50, De63, De75, De110
PVC drain: De50, De75, De100, De125, De150, De200
PVC threading pipe: ф16, ф20, ф25, ф32, ф40, ф50, ф60, ф75, ф100
Trough width (mm)
PVC water supply pipe: 20,25,32,40,50,63,75,90,110,160,200
PVC drain: 40,50,75,90,110,160,200,250,315,400,500
PVC threading pipe: 16,20,25,30,40,50,75,90,110